Skip Headers
Oracle® Database PL/SQL Packages and Types Reference
10g Release 2 (10.2)

Part Number B14258-01
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
View PDF

178 UTL_TCP

With the UTL_TCP package and its procedures and functions, PL/SQL applications can communicate with external TCP/IP-based servers using TCP/IP. Because many Internet application protocols are based on TCP/IP, this package is useful to PL/SQL applications that use Internet protocols and e-mail.

This chapter contains the following topics:


Using UTL_TCP


Overview

The UTL_TCP package provides TCP/IP client-side access functionality in PL/SQL.


Types

CONNECTION Type

This is a PL/SQL record type used to represent a TCP/IP connection.

Syntax

TYPE connection IS RECORD (
    remote_host    VARCHAR2(255),
    remote_port    PLS_INTEGER,
    local_host     VARCHAR2(255),
    local_port     PLS_INTEGER,
    charset        VARCHAR2(30), 
    newline        VARCHAR2(2),
    tx_timeout     PLS_INTEGER,
    private_sd     PLS_INTEGER);

Fields

Table 178-1 Connection Record Type Fields

Field Description
remote_host The name of the remote host when connection is established. NULL when no connection is established.
remote_port The port number of the remote host connected. NULL when no connection is established.
local_host The name of the local host used to establish the connection. NULL when no connection is established.
local_port The port number of the local host used to establish the connection. NULL when no connection is established.
charset The on-the-wire character set. Since text messages in the database may be encoded in a character set that is different from the one expected on the wire (that is, the character set specified by the communication protocol, or the one stipulated by the other end of the communication), text messages in the database will be converted to and from the on-the-wire character set as they are sent and received on the network.
newline The newline character sequence. This newline character sequence is appended to the text line sent by WRITE_LINE API.
tx_timeout A time in seconds that the UTL_TCP package waits before giving up in a read or write operation in this connection. In read operations, this package gives up if no data is available for reading immediately. In write operations, this package gives up if the output buffer is full and no data is to be sent in the network without being blocked. Zero (0) indicates not to wait at all. NULL indicates to wait forever.

Usage Notes

The fields in a connection record are used to return information about the connection, which is often made using OPEN_CONNECTION. Changing the values of those fields has no effect on the connection. The fields private_XXXX are for implementation use only. You should not modify the values.

In the current release of the UTL_TCP package, the parameters local_host and local_port are ignored when open_connection makes a TCP/IP connection. It does not attempt to use the specified local host and port number when the connection is made. The local_host and local_port fields will not be set in the connection record returned by the function.

Time out on write operations is not supported in the current release of the UTL_TCP package.

CRLF

The character sequence carriage-return line-feed. It is the newline sequence commonly used many communication standards.

Syntax

CRLF varchar2(10);

Usage Notes

This package variable defines the newline character sequence commonly used in many Internet protocols. This is the default value of the newline character sequence for WRITE_LINE, specified when a connection is opened. While such protocols use <CR><LF> to denote a new line, some implementations may choose to use just line-feed to denote a new line. In such cases, users can specify a different newline character sequence when a connection is opened.

This CRLF package variable is intended to be a constant that denotes the carriage- return line-feed character sequence. Do not modify its value. Modification may result in errors in other PL/SQL applications.


Exceptions

The exceptions raised by the TCP/IP package are listed in Table 178-2.

Table 178-2 TCP/IP Exceptions

Exception Description
BUFFER_TOO_SMALL Buffer is too small for input that requires look-ahead.
END_OF_INPUT Raised when no more data is available to read from the connection.
NETWORK_ERROR Generic network error.
BAD_ARGUMENT Bad argument passed in an API call (for example, a negative buffer size).
TRANSFER_TIMEOUT No data is read and a read time out occurred.
PARTIAL_MULTIBYTE_CHAR No complete character is read and a partial multibyte character is found at the end of the input.


Rules and Limits

The interface provided in the package only allows connections to be initiated by the PL/SQL program. It does not allow the PL/SQL program to accept connections initiated outside the program.


Examples

The following code example illustrates how the TCP/IP package can be used to retrieve a Web page over HTTP. It connects to a Web server listening at port 80 (standard port for HTTP) and requests the root document.

DECLARE
  c  utl_tcp.connection;  -- TCP/IP connection to the Web server
  ret_val pls_integer; 
BEGIN
  c := utl_tcp.open_connection(remote_host => 'www.acme.com',
                               remote_port =>  80,
                               charset     => 'US7ASCII');  -- open connection
  ret_val := utl_tcp.write_line(c, 'GET / HTTP/1.0');    -- send HTTP request
  ret_val := utl_tcp.write_line(c);
  BEGIN
    LOOP
      dbms_output.put_line(utl_tcp.get_line(c, TRUE));  -- read result
    END LOOP;
  EXCEPTION
    WHEN utl_tcp.end_of_input THEN
      NULL; -- end of input
  END;
  utl_tcp.close_connection(c);
END;

The following code example illustrates how the TCP/IP package can be used by an application to send e-mail (also known as email from PL/SQL). The application connects to an SMTP server at port 25 and sends a simple text message.

PROCEDURE send_mail (sender    IN VARCHAR2, 
                     recipient IN VARCHAR2, 
                   message   IN VARCHAR2) IS 
    mailhost   VARCHAR2(30) := 'mailhost.mydomain.com';
    smtp_error  EXCEPTION;
    mail_conn   utl_tcp.connection;
    PROCEDURE smtp_command(command IN VARCHAR2,
                           ok      IN VARCHAR2 DEFAULT '250') 
    IS 
        response varchar2(3);
        len pls_integer;
    BEGIN
        len := utl_tcp.write_line(mail_conn, command);
        response := substr(utl_tcp.get_line(mail_conn), 1, 3);
        IF (response <> ok) THEN
            RAISE smtp_error;
        END IF;
    END;

BEGIN
    mail_conn := utl_tcp.open_connection(remote_host => mailhost,
                                         remote_port => 25,
                                         charset     => 'US7ASCII');
    smtp_command('HELO ' || mailhost);
    smtp_command('MAIL FROM: ' || sender);
    smtp_command('RCPT TO: ' || recipient);
    smtp_command('DATA', '354');
    smtp_command(message);
    smtp_command('QUIT', '221');
    utl_tcp.close_connection(mail_conn);
EXCEPTION
    WHEN OTHERS THEN
        -- Handle the error
END;

Summary of UTL_TCP Subprograms

Table 178-3 UTL_TCP Package Subprograms

Subprogram Description
AVAILABLE Function
Determines the number of bytes available for reading from a TCP/IP connection
CLOSE_ALL_CONNECTIONS Procedure
Closes all open TCP/IP connections
CLOSE_CONNECTION Procedure
Closes an open TCP/IP connection
FLUSH Procedure
Transmits all data in the output buffer, if a buffer is used, to the server immediately
GET_LINE Function
Convenient forms of the read functions, which return the data read instead of the amount of data read
GET_RAW Function
Convenient forms of the read functions, which return the data read instead of the amount of data read
GET_TEXT Function
Convenient forms of the read functions, which return the data read instead of the amount of data read
OPEN_CONNECTION Function
Opens a TCP/IP connection to a specified service
READ_LINE Function
Receives a text line from a service on an open connection
READ_RAW Function
Receives binary data from a service on an open connection
READ_TEXT Function
Receives text data from a service on an open connection
WRITE_LINE Function
Transmits a text line to a service on an open connection
WRITE_RAW Function
Transmits a binary message to a service on an open connection
WRITE_TEXT Function
Transmits a text message to a service on an open connection


AVAILABLE Function

This function determines the number of bytes available for reading from a TCP/IP connection. It is the number of bytes that can be read immediately without blocking. Determines if data is ready to be read from the connection.

Syntax

UTL_TCP.AVAILABLE (
   c        IN OUT NOCOPY connection, 
   timeout  IN PLS_INTEGER DEFAULT 0)
RETURN num_bytes PLS_INTEGER;

Parameters

Table 178-4 AVAILABLE Function Parameters

Parameter Description
c The TCP connection to determine the amount of data that is available to be read from.
timeout A time in seconds to wait before giving up and reporting that no data is available. Zero (0) indicates not to wait at all. NULL indicates to wait forever.

Return Values

Table 178-5 AVAILABLE Function Return Values

Parameter Description
num_bytes The number of bytes available for reading without blocking.

Usage Notes

The connection must have already been opened through a call to OPEN_CONNECTION. Users may use this API to determine if data is available to be read before calling the read API so that the program will not be blocked because data is not ready to be read from the input.

The number of bytes available for reading returned by this function may less than than what is actually available. On some platforms, this function may only return 1, to indicate that some data is available. If you are concerned about the portability of your application, assume that this function returns a positive value when data is available for reading, and 0 when no data is available. This function returns a positive value when all the data at a particular connection has been read and the next read will result in the END_OF_INPUT exception.

The following example illustrates using this function in a portable manner:

DECLARE
   c   utl_tcp.connection
   data VARCHAR2(256);
   len  PLS_INTEGER;
BEGIN
   c := utl_tcp.open_connection(...);
   LOOP
      IF (utl_tcp.available(c) > 0) THEN
         len := utl_tcp.read_text(c, data, 256);
      ELSE
         ---do some other things
        . . . .
      END IF
   END LOOP;
END;

Related Functions

READ_RAW, READ_TEXT, READ_LINE


CLOSE_ALL_CONNECTIONS Procedure

This procedure closes all open TCP/IP connections.

Syntax

UTL_TCP.CLOSE_ALL_CONNECTIONS;

Usage Notes

This call is provided to close all connections before a PL/SQL program avoid dangling connections.

Related Functions

OPEN_CONNECTION, CLOSE_CONNECTION.


CLOSE_CONNECTION Procedure

This procedure closes an open TCP/IP connection.

Syntax

UTL_TCP.CLOSE_CONNECTION (
   c IN OUT NOCOPY connection);

Parameters

Table 178-6 CLOSE_CONNECTION Procedure Parameters

Parameter Description
c The TCP connection to close.

Usage Notes

Connection must have been opened by a previous call to OPEN_CONNECTION. The fields remote_host, remote_port, local_host, local_port and charset of c will be reset after the connection is closed.

An open connection must be closed explicitly. An open connection will remain open when the PL/SQL record variable that stores the connection goes out-of-scope in the PL/SQL program. Failing to close unwanted connections may result in unnecessary tying up of local and remote system resources.


FLUSH Procedure

This procedure transmits all data in the output buffer, if a buffer is used, to the server immediately.

Syntax

UTL_TCP.FLUSH (
   c IN OUT NOCOPY connection);

Parameters

Table 178-7 FLUSH Procedure Parameters

Parameter Description
c The TCP connection to send data to.

Usage Notes

The connection must have already been opened through a call to OPEN_CONNECTION.

Related Functions

WRITE_RAW, WRITE_TEXT, WRITE_LINE


GET_LINE Function

This function returns the data read instead of the amount of data read.

Syntax

UTL_TCP.GET_LINE (
   c           IN OUT NOCOPY connection,
   remove_crlf IN            BOOLEAN DEFAULT FALSE,
   peek        IN            BOOLEAN DEFAULT FALSE) 
 RETURN VARCHAR2;

Parameters

Table 178-8 GET_LINE Function Parameters

Parameter Description
c The TCP connection to receive data from.
remove_crlf If TRUE, the trailing CR/LF character(s) are removed from the received message.
peek Normally, you want to read the data and remove it from the input queue, that is, consume it. In some situations, you may just want to look ahead at the data, that is, peek at it, without removing it from the input queue, so that it is still available for reading (or even peeking) in the next call. To keep the data in the input queue, set this flag to TRUE and set up an input buffer before the connection is opened. The amount of data you can peeked at (that is, read but keep in the input queue) must be less than the size of input buffer.

Usage Notes

Related Functions

GET_RAW, GET_TEXT, READ_LINE


GET_RAW Function

This function returns the data read instead of the amount of data read.

Syntax

UTL_TCP.GET_RAW (
   c     IN OUT NOCOPY connection,
   len   IN            PLS_INTEGER DEFAULT 1,
   peek  IN            BOOLEAN     DEFAULT FALSE) 
 RETURN RAW;

Parameters

Table 178-9 GET_RAW Function Parameters

Parameter Description
c The TCP connection to receive data from.
len The number of bytes (or characters for VARCHAR2) of data to receive. Default is 1.
peek Normally, you want to read the data and remove it from the input queue, that is, consume it. In some situations, you may just want to look ahead at the data, that is, peek at it, without removing it from the input queue, so that it is still available for reading (or even peeking) in the next call. To keep the data in the input queue, set this flag to TRUE and set up an input buffer before the connection is opened. The amount of data you can peeked at (that is, read but keep in the input queue) must be less than the size of input buffer.
remove_crlf If TRUE, the trailing CR/LF character(s) are removed from the received message.

Usage Notes

The connection must have already been opened through a call to OPEN_CONNECTION.

For all the get_* APIs described in this section, see the corresponding READ_* API for the read time out issue. For GET_TEXT and GET_LINE, see the corresponding READ_* API for character set conversion, buffer size, and multibyte character issues.

Related Functions

GET_RAW, GET_TEXT, READ_RAW, READ_TEXT, READ_LINE


GET_TEXT Function

This function returns the data read instead of the amount of data read.

Syntax

UTL_TCP.GET_TEXT (
   c    IN OUT NOCOPY connection,
   len  IN            PLS_INTEGER DEFAULT 1,
   peek IN            BOOLEAN     DEFAULT FALSE) 
 RETURN VARCHAR2;

Parameters

Table 178-10 GET_TEXT Function Parameters

Parameter Description
c The TCP connection to receive data from.
len The number of bytes (or characters for VARCHAR2) of data to receive. Default is 1.
peek Normally, you want to read the data and remove it from the input queue, that is, consume it. In some situations, you may just want to look ahead at the data, that is, peek at it, without removing it from the input queue, so that it is still available for reading (or even peeking) in the next call. To keep the data in the input queue, set this flag to TRUE and set up an input buffer before the connection is opened. The amount of data you can peeked at (that is, read but keep in the input queue) must be less than the size of input buffer.
remove_crlf If TRUE, the trailing CR/LF character(s) are removed from the received message.

Usage Notes

The connection must have already been opened through a call to OPEN_CONNECTION.

For all the get_* APIs described in this section, see the corresponding read_* API for the read time out issue. For GET_TEXT and GET_LINE, see the corresponding READ_* API for character set conversion, buffer size, and multibyte character issues.

Related Functions

READ_RAW, READ_TEXT, READ_LINE


OPEN_CONNECTION Function

This function opens a TCP/IP connection to a specified service.

Syntax

UTL_TCP.OPEN_CONNECTION  (
   remote_host      IN VARCHAR2,
   remote_port      IN PLS_INTEGER,
   local_host       IN VARCHAR2 DEFAULT NULL,
   local_port       IN PLS_INTEGER DEFAULT NULL,
   in_buffer_size   IN PLS_INTEGER DEFAULT NULL,
   out_buffer_size  IN PLS_INTEGER DEFAULT NULL,
   charset          IN VARCHAR2 DEFAULT NULL,
   newline          IN VARCHAR2 DEFAULT CRLF,
   tx_timeout       IN PLS_INTEGER DEFAULT NULL)
  RETURN connection;

Parameters

Table 178-11 OPEN_CONNECTION Function Parameters

Parameter Description
remote_host The name of the host providing the service. When remote_host is NULL, it connects to the local host.
remote_port The port number on which the service is listening for connections.
local_host The name of the host providing the service. NULL means don't care.
local_port The port number on which the service is listening for connections. NULL means don't care.
in_buffer_size The size of input buffer. The use of an input buffer can speed up execution performance in receiving data from the server. The appropriate size of the buffer depends on the flow of data between the client and the server, and the network condition. A 0 value means no buffer should be used. A NULL value means the caller does not care if a buffer is used or not. The maximum size of the input buffer is 32767 bytes.
out_buffer_size The size of output buffer. The use of an output buffer can speed up execution performance in sending data to the server. The appropriate size of buffer depends on the flow of data between the client and the server, and the network condition. A 0 value means no buffer should be used. A NULL value means the caller does not care if a buffer is used or not. The maximum size of the output buffer is 32767 bytes.
charset The on-the-wire character set. Since text messages in the database may be encoded in a character set that is different from the one expected on the wire (that is, the character set specified by the communication protocol, or the one stipulated by the other end of the communication), text messages in the database will be converted to and from the on-the-wire character set as they are sent and received on the network using READ_TEXT, READ_LINE, WRITE_TEXT and WRITE_LINE. Set this parameter to NULL when no conversion is needed.
newline The newline character sequence. This newline character sequence is appended to the text line sent by WRITE_LINE API.
tx_timeout A time in seconds that the UTL_TCP package should wait before giving up in a read or write operations in this connection. In read operations, this package gives up if no data is available for reading immediately. In write operations, this package gives up if the output buffer is full and no data is to be sent in the network without being blocked. Zero (0) indicates not to wait at all. NULL indicates to wait forever.

Return Values

Table 178-12 OPEN_CONNECTION Function Return Values

Parameter Description
connection A connection to the targeted TCP/IP service.

Usage Notes

Note that connections opened by this UTL_TCP package can remain open and be passed from one database call to another in a shared server configuration. However, the connection must be closed explicitly. The connection will remain open when the PL/SQL record variable that stores the connection goes out-of-scope in the PL/SQL program. Failing to close unwanted connections may result in unnecessary tying up of local and remote system resources.

In the current release of the UTL_TCP package, the parameters local_host and local_port are ignored when open_connection makes a TCP/IP connection. It does not attempt to use the specified local host and port number when the connection is made. The local_host and local_port fields will not be set in the connection record returned by the function.

Time out on write operations is not supported in the current release of the UTL_TCP package.

Related Functions

CLOSE_CONNECTION, CLOSE_ALL_CONNECTIONS


READ_LINE Function

This function receives a text line from a service on an open connection. A line is terminated by a line-feed, a carriage-return or a carriage-return followed by a line-feed.

Syntax

UTL_TCP.READ_LINE (
   c           IN OUT NOCOPY connection,
   data        IN OUT NOCOPY VARCHAR2 CHARACTER SET ANY_CS,
   peek        IN            BOOLEAN DEFAULT FALSE) 
 RETURN num_chars PLS_INTEGER;

Parameters

Table 178-13 READ_LINE Function Parameters

Parameter Description
c The TCP connection to receive data from.
data The data received.
remove_crlf If TRUE, the trailing CR/LF character(s) are removed from the received message.
peek Normally, you want to read the data and remove it from the input queue, that is, consume it. In some situations, you may just want to look ahead at the data, that is, peek at it, without removing it from the input queue, so that it is still available for reading (or even peeking) in the next call. To keep the data in the input queue, set this flag to TRUE and set up an input buffer before the connection is opened. The amount of data you can peeked at (that is, read but keep in the input queue) must be less than the size of input buffer.

Return Values

Table 178-14 READ_LINE Function Return Values

Parameter Description
num_chars The actual number of characters of data received.

Usage Notes

The connection must have already been opened through a call to OPEN_CONNECTION. This function does not return until the end-of-line have been reached, or the end of input has been reached. Text messages will be converted from the on-the-wire character set, specified when the connection was opened, to the database character set before they are returned to the caller.

If transfer time out is set when the connection is opened, this function waits for each data packet to be ready to read until time out occurs. If it occurs, this function stops reading and returns all the data read successfully. If no data is read successfully, the transfer_timeout exception is raised. The exception can be handled and the read operation can be retried later.

If a partial multibyte character is found at the end of input, this function stops reading and returns all the complete multibyte characters read successfully. If no complete character is read successfully, the partial_multibyte_char exception is raised. The exception can be handled and the bytes of that partial multibyte character can be read as binary by the READ_RAW function. If a partial multibyte character is seen in the middle of the input because the remaining bytes of the character have not arrived and read time out occurs, the transfer_timeout exception is raised instead. The exception can be handled and the read operation can be retried later.

Related Functions

READ_RAW, READ_TEXT, AVAILABLE


READ_RAW Function

This function receives binary data from a service on an open connection.

Syntax

UTL_TCP.READ_RAW (
   c     IN OUT NOCOPY connection,
   data  IN OUT NOCOPY RAW,
   len   IN            PLS_INTEGER DEFAULT 1,
   peek  IN            BOOLEAN     DEFAULT FALSE)
 RETURN num_bytes PLS_INTEGER;

Parameters

Table 178-15 READ_RAW Function Parameters

Parameter Description
c The TCP connection to receive data from.
data (IN OUT COPY) The data received.
len The number of bytes of data to receive.
peek Normally, you want to read the data and remove it from the input queue, that is, consume it. In some situations, you may just want to look ahead at the data, that is, peek at it, without removing it from the input queue, so that it is still available for reading (or even peeking) in the next call. To keep the data in the input queue, set this flag to TRUE and set up an input buffer before the connection is opened. The amount of data you can peeked at (that is, read but keep in the input queue) must be less than the size of input buffer.

Return Values

Table 178-16 READ_RAW Function Return Values

Parameter Description
num_bytes The actual number of bytes of data received.

Usage Notes

The connection must have already been opened through a call to OPEN_CONNECTION. This function does not return until the specified number of bytes have been read, or the end of input has been reached.

If transfer time out is set when the connection is opened, this function waits for each data packet to be ready to read until time out occurs. If it occurs, this function stops reading and returns all the data read successfully. If no data is read successfully, the transfer_timeout exception is raised. The exception can be handled and the read operation can be retried later.

Related Functions

READ_TEXT, READ_LINE, AVAILABLE


READ_TEXT Function

This function receives text data from a service on an open connection.

Syntax

UTL_TCP.READ_TEXT (
   c    IN OUT NOCOPY connection,
   data IN OUT NOCOPY VARCHAR2 CHARACTER SET ANY_CS,
   len  IN            PLS_INTEGER DEFAULT 1,
   peek IN            BOOLEAN     DEFAULT FALSE) 
RETURN num_chars PLS_INTEGER;

Parameters

Table 178-17 READ_TEXT Function Parameters

Parameter Description
c The TCP connection to receive data from.
data The data received.
len The number of characters of data to receive.
peek Normally, users want to read the data and remove it from the input queue, that is, consume it. In some situations, users may just want to look ahead at the data without removing it from the input queue so that it is still available for reading (or even peeking) in the next call. To keep the data in the input queue, set this flag to TRUE and an input buffer must be set up when the connection is opened. The amount of data that you can peek at (that is, read but keep in the input queue) must be less than the size of input buffer.

Return Values

Table 178-18 READ_TEXT Function Return Values

Parameter Description
num_chars The actual number of characters of data received.

Usage Notes

The connection must have already been opened through a call to OPEN_CONNECTION. This function does not return until the specified number of characters has been read, or the end of input has been reached. Text messages will be converted from the on-the-wire character set, specified when the connection was opened, to the database character set before they are returned to the caller.

Unless explicitly overridden, the size of a VARCHAR2 buffer is specified in terms of bytes, while the parameter len refers to the maximum number of characters to be read. When the database character set is multibyte, where a single character may consist of more than 1 byte, you should ensure that the buffer can hold the maximum of characters. In general, the size of the VARCHAR2 buffer should equal the number of characters to be read, multiplied by the maximum number of bytes of a character of the database character set.

If transfer time out is set when the connection is opened, this function waits for each data packet to be ready to read until time out occurs. If it occurs, this function stops reading and returns all the data read successfully. If no data is read successfully, the transfer_timeout exception is raised. The exception can be handled and the read operation can be retried later.

If a partial multibyte character is found at the end of input, this function stops reading and returns all the complete multibyte characters read successfully. If no complete character is read successfully, the partial_multibyte_char exception is raised. The exception can be handled and the bytes of that partial multibyte character can be read as binary by the READ_RAW function. If a partial multibyte character is seen in the middle of the input because the remaining bytes of the character have not arrived and read time out occurs, the transfer_timeout exception is raised instead. The exception can be handled and the read operation can be retried later.

Related Functions

READ_RAW, READ_LINE, AVAILABLE


WRITE_LINE Function

This function transmits a text line to a service on an open connection. The newline character sequence will be appended to the message before it is transmitted.

Syntax

UTL_TCP.WRITE_LINE (
   c    IN OUT NOCOPY connection,
   data IN            VARCHAR2 DEFAULT NULL CHARACTER SET ANY_CS) 
  RETURN PLS_INTEGER;

Parameters

Table 178-19 WRITE_LINE Function Parameters

Parameter Description
c The TCP connection to send data to.
data The buffer containing the data to be sent.

Return Values

Table 178-20 WRITE_LINE Function Return Values

Parameter Description
num_chars The actual number of characters of data transmitted.

Usage Notes

The connection must have already been opened through a call to OPEN_CONNECTION. Text messages will be converted to the on-the-wire character set, specified when the connection was opened, before they are transmitted on the wire.

Related Functions

WRITE_RAW, WRITE_TEXT, FLUSH


WRITE_RAW Function

This function transmits a binary message to a service on an open connection. The function does not return until the specified number of bytes have been written.

Syntax

UTL_TCP.WRITE_RAW (
   c    IN OUT NOCOPY connection,
   data IN            RAW,
   len  IN            PLS_INTEGER DEFAULT NULL) 
 RETURN num_bytes PLS_INTEGER;

Parameters

Table 178-21 WRITE_RAW Function Parameters

Parameter Description
c The TCP connection to send data to.
data The buffer containing the data to be sent.
len The number of bytes of data to transmit. When len is NULL, the whole length of data is written.

Return Values

Table 178-22 WRITE_RAW Function Return Values

Parameter Description
num_bytes The actual number of bytes of data transmitted.

Usage Notes

The connection must have already been opened through a call to OPEN_CONNECTION.

Related Functions

WRITE_TEXT, WRITE_LINE, FLUSH


WRITE_TEXT Function

This function transmits a text message to a service on an open connection.

Syntax

UTL_TCP.WRITE_TEXT (
   c    IN OUT NOCOPY connection,
   data IN            VARCHAR2 CHARACTER SET ANY_CS,
   len  IN            PLS_INTEGER DEFAULT NULL) 
 RETURN num_chars PLS_INTEGER;

Parameters

Table 178-23 WRITE_TEXT Function Parameters

Parameter Description
c The TCP connection to send data to.
data The buffer containing the data to be sent.
len The number of characters of data to transmit. When len is NULL, the whole length of data is written. The actual amount of data written may be less because of network condition.

Return Values

Table 178-24 WRITE_TEXT Function Return Values

Parameter Description
num_chars The actual number of characters of data transmitted.

Usage Notes

The connection must have already been opened through a call to OPEN_CONNECTION. Text messages will be converted to the on-the-wire character set, specified when the connection was opened, before they are transmitted on the wire.

Related Functions

WRITE_RAW, WRITE_LINE, FLUSH