Skip Headers
Oracle® Text Application Developer's Guide
10g Release 2 (10.2)

Part Number B14217-01
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
View PDF

11 Migrating Oracle Text Applications

This chapter covers issues relating to migrating your applications from previous releases of Oracle Text. It consists of two sections:

11.1 Migrating to Oracle Text 10g Release 2 (10.2)

This section covers issues relating to migrating your applications to Oracle Text 10g Release 2 (10.2).

11.1.1 New Filter (INSO_FILTER versus AUTO_FILTER)

For Oracle Text 10g Release 2, the INSO_FILTER filter type has been replaced by the AUTO_FILTER filter type. To maintain compatibility with existing Oracle Text applications, INSO_FILTER functionality is supported by AUTO_FILTER, and the INSO_FILTER filter type is being retained, although its behavior has been changed to match that of AUTO_FILTER.

For most users, the change in filter types will have no significant effect, and most users will not have to change their applications or otherwise take any steps to migrate to the new filter type. The most significant differences produced by this change are as follows:

  • AUTO_FILTER supports a different set of document types than INSO_FILTER. For a list of supported document types, see the Supported File Formats appendix of the Oracle Text Reference.

  • Display characteristics of HTML output from the new filter may differ from those output by the old filter.

  • A different set of platforms support the AUTO_FILTER type than support INSO_FILTER. For a list of supported platforms, see the Supported File Formats appendix of the Oracle Text Reference.

Along with the change from INSO_FILTER to AUTO_FILTER, several related changes are also part of the filter migration:

  • The INSO_TIMEOUT and INSO_OUTPUT_FORMATTING attributes of MAIL_FILTER have been replaced by the AUTO_FILTER_TIMEOUT and AUTO_FILTER_OUTPUT_FORMATTING attributes, respectively.

  • The INSOFILTER directive used in the mail configuration file of MAIL_FILTER has been replaced with the AUTO_FILTER directive.

  • The PL/SQL constant TRACE_IDX_INSO_FILTER for tracing, used in procedures such as CTX_OUTPUT.ADD_TRACE, has been replaced by the TRACE_IDX_AUTO_FILTER filter.

  • The system-defined preference CTXSYS.INSO_FILTER has been replaced by the CTXSYS.AUTO_FILTER preference.

  • The default values of DEFAULT_FILTER_FILE and DEFAULT_FILTER_BINARY system parameters has been changed from CTXSYS.INSO_FILTER to CTXSYS.AUTO_FILTER for new installations and databases upgrading to this release, if these default values have not been modified. For databases upgrading to this release which have modified these default values, the modified default values will continue to be used.

For backward compatibility, INSO_FILTER, as well as most of its associated filter types, constants, and attributes have been retained in this release; however, users should use AUTO_FILTER in new applications and update their older applications whenever possible.

11.1.1.1 Migrating to the AUTO_FILTER Filter Type

Most applications will not have to be modified to reflect the change to the AUTO_FILTER type. The following migration steps will be performed automatically when you upgrade to this release:

  • If an existing index uses the INSO_FILTER filter type, then it will be migrated to the AUTO_FILTER filter type.

  • If an existing index uses the MAIL_FILTER filter type, then the INSO_TIMEOUT and INSO_OUTPUT_FORMATTING attributes will be migrated to the AUTO_FILTER_TIMEOUT nd AUTO_FILTER_OUTPUT_FORMATTING attributes, respectively.

  • If the default values of the system parameters DEFAULT_FILTER_FILE and DEFAULT_FILTER_BINARY have not already been modified, then they will be migrated from CTXSYS.INSO_FILTER to CTXSYS.AUTO_FILTER.

Although no actions are required to migrate to the new filter system, Oracle Text users upgrading their databases to this release should take the following steps to migrate away from using APIs deprecated by this release:

  • If an index uses the MAIL_FILTER filter type with a nondefault mail configuration file, edit the file, replacing all occurrences of the INSOFILTER directive with the AUTO_FILTER directive.

  • Replace the use of the PL/SQL constant TRACE_IDX_INSO_FILTER in your application with the TRACE_IDX_AUTO_FILTER constant.

  • Replace the use of the system-defined preference CTXSYS.INSO_FILTER in your applications with CTXSYS.AUTO_FILTER.

11.2 Migrating to Oracle Text 10g Release 1 (10.1)

This section covers issues relating to migrating your applications to Oracle Text 10g Release 1 (10.1). It also contains a note on migrating back from release 10.1.

11.2.1 Security Improvements in Oracle Text 10g Release 1

In releases of Oracle Text previous to 10g Release 1, CTXSYS had DBA privileges. To tighten security and protect the database in the case of unauthorized access, CTXSYS now has only CONNECT and RESOURCE roles, and only limited, necessary direct grants on some system views and packages. Some applications using Oracle Text may therefore require minor changes in order to work properly with this security change. Here are the major effects of the security improvements, their possible effects on Oracle Text applications, and the steps needed to ensure proper operation in Oracle Database 10g.

11.2.1.1 CTXSYS No Longer Has DBA Permissions

CTXSYS no longer has DBA permissions. This may affect indexes using USER_DATASTORE, PROCEDURE_FILTER, or USER_LEXER objects. For example, suppose that you have an index using a USER_DATASTORE whose procedure is CTXSYS.PROC, and that procedure refers to other schemas' objects:

create procedure proc(r in rowid, d in out nocopy clob)
is
begin
  select text into l_data from scott.example ...

Previously, this user datastore would have worked properly because CTXSYS was able to select from any table—namely, SCOTT.EXAMPLE. However, in Oracle Database 10g, CTXSYS does not have DBA privileges and is not allowed to select from SCOTT.EXAMPLE. This makes the procedure PROC invalid, which leads to errors when indexing or sync is done for this index.

To resolve this problem, Oracle recommends migrating all user datastores, procedure filters, and user lexers from CTXSYS-owned procedures to index-owner-owned procedures (see "Migrating CTXSYS-Owned Procedures").

11.2.1.2 Migrating CTXSYS-Owned Procedures

Here are the steps to migrate an index using a CTXSYS-owned procedure to use an index-owner-owned procedure:

  1. Create a procedure owned by the index owner that is equivalent to the CTXSYS-owned procedure. If your application's CTXSYS-owned procedure simply calls another procedure owned by the index owner, use that procedure for step 2. Otherwise, copy the code from the CTXSYS-owned procedure into a new procedure owned by the index owner, making any needed changes for the change in schema.

  2. Create a new user datastore, procedure filter, or user lexer preference that uses the index-owner-owned procedure. Alternatively, you can modify the existing preference using CTX_DDL.SET_ATTRIBUTE, if the preference used to create the index still exists.

  3. Replace the existing datastore or filter or lexer with the new, updated preference using the new REPLACE METADATA command. For instance, to replace a user datastore:

    alter index <myindex> rebuild parameters ('replace metadata datastore <new_datastore_preference>');
    
    

    REPLACE METADATA does not rebuild the index, so this command will not affect existing index data.

11.2.1.3 Effective User During Indexing

In previous releases of Oracle Text, the effective user during indexing or sync was CTXSYS. As a result, CTXSYS required execute permission on all BFILE directories, execute permission on any procedures called from user datastores, procedure filters, or user lexers, and the CTXSYS user's TEMP tablespace was used during indexing. In Oracle Database 10g, the effective user during indexing is the index owner, which eliminates these caveats.

11.2.1.4 Procedures Do Not Need to Be Owned by CTXSYS

Previously, procedures used in user datastores, procedure filters, and user lexers had to be owned by CTXSYS. In Oracle Database 10g, these procedures can be owned by any schema, so long as the index owner has execute privileges on them.

This principally affects creation of preferences. In previous releases of Oracle Text, a user datastore created with:

beginctx_ddl.create_preference('example','user_datastore');ctx_ddl.set_attribute('example','procedure','proc');end;

would have used the procedure CTXSYS.PROC. However, in Oracle Database 10g, standard Oracle Database rules are applied to the input "PROC," and this resolves to USER.PROC. Any application code that creates user datastores, procedure filters, or user lexers should either create the preferences as the owner of the procedure, or prepend the correct owner name to the procedure name. For example:

ctx_ddl.set_attribute('example','procedure','user.proc');

11.2.1.5 Synching and Optimizing of Other Users' Indexes

In previous releasess of Oracle Text, only the owner of the index and CTXSYS were allowed to sync or optimize an index through CTX_DDL.SYNC_INDEX and CTX_DDL.OPTIMIZE_INDEX. In Oracle Database 10g, any user with the ALTER ANY INDEX system privilege is also allowed to sync or optimize any index.

11.2.1.6 CTX Packages and Invoker's Rights

Most public CTX packages, such as CTX_DDL, CTX_QUERY, and CTX_REPORT, are now invoker's rights packages.

11.2.1.7 CREATE TABLE Permissions

In Oracle Database 10g, if a text index is created by one user for another user, or if the create index statement is issued from a PL/SQL block, the index owner must be granted the CREATE TABLE privilege in order for the indexing to succeed. Even if the index owner has the RESOURCE role, CREATE TABLE must be specifically granted.

11.2.2 Migrating Back to Previous Releases from Release 10.1

During the upgrade to Oracle Database 10g, Oracle Text drops a number of procedures belonging to CTXSYS. (These procedures are invalid under Oracle Database 10g and have the name format DR$indexid$U.) If you migrate back to a pre-10g release of Oracle Database, you must re-create these procedures in order for DML to work. To do this, after the backward migration—once all the pre-10g packages have been reinstalled—rename each CTXCAT index; the rename code will re-create that procedure. (You can rename the procedures back if you want to retain the original names).